Pre-Made Resin Crate ID Tags

The crate tags listed here are already made and only need you to be finished with your customized name/saying and you can add a scene in vinyl (Mountains, Trees, Forest, Moon and Stars, ocean theme...etc) here as well.

ACTUAL TAG SIZES

-Small Rectangle (2.3" x 3.9")

-Medium Rectangle (3.8" x 5.8")

-Large Rectangle (4.75" x 7")

-Small Oval (2.25" x 3.5")

-Medium Oval (4" x 5.5")

-Large Oval (4.6" x 7")

-Star (6.75" x 7.15")

-Heart (4.8" x 5.75")

-Circle (5" diameter)

ATTACHMENT METHOD POSITIONING DETAILS FOR ALL SHAPES AND NUMBER OF ATTACHMENT POINTS 

---STICK ON CRATE & TAG MAGNETS---

These will not be adhered to the tag and you may attach them to your crate and tag in the location you choose. The magnet comes in 2 parts, one goes on the crate and one on the tag. Of the two sides, the bigger one goes on your tag and the smaller on the crate and this enables your crate tag to be stuck to any metal(magnetic) surface. If you want to move your tag from crate to crate, I suggest getting multiple sets of magnets and put the back parts on any surfaces you want to attach the tag and the front part on your crate tag(the other half of the extra magnets you may not use). Clean both surfaces with isopropyl alcohol prior to adhering sticky magnets to crate & tag. Then, peel the red plastic from the sticky clear tape on the magnets and stick where desired. 

---NYLON TIE STRAPS (ZIP TIES) & SPRING O RINGS---

Spring O rings will be attached to a key ring that is attached to the crate tag. Opening on ring is 0.5".

Note: The amount of attachment points you choose here will be the amount of holes I make in the tag and they will be placed as depicted in the photo below unless otherwise specified.

-Small, Medium & Large Rectangles

2 attached top corners

3 attached at top corners and bottom centre

4 attached at all 4 corners

-Small, Medium & Large Ovals & Circle

2 attached to top on each side

3 attached to top on each side + 1 on bottom

4 attached on top and bottom on each side

-Star 

2 attached to top right and left tips of star

3 attached to top tip + bottom right and left tips of star

4 attached to top and bottom right and left tips of star

-Heart 

2 attached to top right and left sides 

3 attached to top right and left sides + bottom centre

4 please do not select 4 attachment points for the heart

DOUBLE MY FONT EXAMPLE: 

Below you can see a doubled font. The top shadow in white, top layer in black. I just offset the top layer of font slightly off of the bottom and appears to be shadowed. This really does make the name/saying stand out more.

Resin is a long lasting and strong material that is ideal for pet crate ID tags.

--DISCLAIMER/WARNING-- Resin is toxic to animals and can also cause intestinal obstructions if ingested. For safety, please ensure your pet can not chew or ingest the tag, keyring, accessories or title charms. By placing your order, you are confirming that you have read and understand the statement above. Epoxy resin is not resistant to extreme heat and it is not recommended you keep your item in the hot sun or a hot vehicle for long periods. Slight variations/ imperfections may occur as all tags are hand made.